Is your AC not cooling properly? It is really irritating when there is an AC malfunction in the horrible summer heat. But then, you can always get an air conditioning repair. However, you also need to understand why your AC is not cooling.
AC not cooling
It can be one of the reasons that your AC is not working. You can check once to ensure if the AC is plugged into the outlet correctly or not. Make sure that the power chord is intact.
If the outlet and cord are fine, there can be an issue with your electrical panel. Your unit might have blown a fuse. Many units have overload switches built-in. Make sure you check this as well & check the inlet voltage supply and out the supply of your stabilizer.
You should always ensure regular cleaning of the area around the compressor of your air conditioner. Dirt and debris may stop the unit from running properly. You can get your compressor cleaned in such cases. Make sure that your AC gets proper cleaning and maintenance.
jacket ac service
Clogged or dirty filter
Now, many AC units have a built-in mechanism that can shut the unit down if the filter is clogged or Shows an indication on your panel. This reduces the cooling of your AC. So, maybe your AC filter is too clogged that it is not allowing adequate airflow. Make sure that you check your ac filter. Clean or replace it if required.
Clogged drain
Most air conditioners remove moisture from the air by draining out the water through a drain pipe. Now, one of the reasons that your AC is not working can be the clogging of the drain pipe.
Maybe, the pipe is clogged with algae or dust and that is causing the unit to shut down or start the water leakage problem. Well, in that case, you can get the pipe cleaned with a mild bleach solution. You can also get the piping replaced if necessary.
Panel (PCB) Problem – AC running but not cooling home?
Is your AC not cooling properly? Are you thinking ‘why is my AC not cooling? Worrying about your AC low cooling problem? Well, maybe the thermostat on your unit is not set at an appropriate temperature. Check your thermostat settings. Maybe the thermostat is broken and has become non-responsive.
Try to turn down the dial or push the buttons to the lowest setting. Check if that sets the unit to run. If possible, ensure that all wiring into the thermostat unit is connected properly.
Insufficient cooling gas in AC?
The problem of refrigerant leaks:
Are you searching ‘why is my AC running but not cooling’ on the internet? Wondering how to increase AC cooling in the home? One of the most common reasons for bad cooling of air conditioners can be a refrigerant leak. Refrigerant levels can drop over time due to slow leaks. When the refrigerant circulation is not sufficient around the evaporator coil, it decreases the efficiency of your AC.
Is your AC not cooling? Well, a refrigerant leak can be the reason behind it. In that case, you can get it repaired as soon as possible. Don’t try to fix the issue yourself as it is a very complex method and requires expertise. If you get these issues fixed, you will be able to experience maximum cooling temperature in AC.
Burnt Capacitor:
The capacitor plays a role to start a compressor it gives starting to the compressor. So, if your capacitor is burnt then the compressor does not start and there are cooling issues. So, capacitors also play a great role in Air Conditioner cooling.
For more info Visit Mignato Services